Warehouse Industry Optimization Amid COVID-19

Sometimes it’s easy to tell when to upgrade equipment. For example, an aerial lift or electric tug may stop working altogether and need to be replaced. But other times, it can be harder to tell if an upgrade is necessary. So here are some common telltales that it’s time for an update:

A warehouse can be filled with safety hazards which, if left unchecked, can cause serious harm to your employees or visitors.

4. You’re having difficulty tracking stock. This may be a sign that your current inventory tracking system isn’t sufficient. You may need to update your inventory software to help future-proof your business.

5. You’re unable to implement new technology. Working technology is essential to a well-functioning warehouse. At times, you may need to upgrade to faster internet or make electrical upgrades to run the software or tools you need to keep your warehouse operating optimally.

6. There’s not enough space. As your business grows, you may find that there’s no longer enough space in your warehouse to store inventory like returns. This calls for adding more space or upgrading to a modern racking system that is more space efficient.

7. Your dock is getting blocked up. If your loading dock starts having scheduling issues or you notice an increase in worker accidents or delivery slowing down, it may be time to upgrade to new scheduling software.

8. Overall productivity is decreasing. Sometimes overall productivity at your business may start to fall. This could happen for a variety of reasons, but one reason might be your warehouse equipment. For example, you may need to rearrange pathways or get a new tracking system.

Did you know that most forklifts can get up to a max speed of 10 MPH? That may not sound very fast, but it’s more than enough speed for a tragic accident. Someone could end up hurt or worse, and your business could suffer costly damage to machinery, supplies, and infrastructure.

In this article, we’ll go over why forklift speed matters. Specifically, we’ll cover official regulations, why it’s important to set your own speed limits, how to set them, and more.

You may be surprised to learn that, according to the Occupational Safety and Health Administration (OSHA), “OSHA does not have specific speed limits set for the safe operation of a powered industrial truck.” That said, OSHA does have regulations for how forklifts should be operated. These include the following:

Furthermore, there are industry standards that you may want to follow. For example, the Material Handling Equipment Distributors Association suggests a “maximum allowable speed of a forklift truck is 8 mph, but in areas where pedestrians move about, the forklift should not move faster than 3 mph.”

Just because there’s not an official forklift speed limit doesn’t mean you shouldn’t set your own. Forklifts can weigh anywhere from 3,000 to 20,000 pounds. Even at low speeds, they carry a lot of force and momentum.

On a similar note, forklifts can require a lot of stopping distance. At 4 MPH, the average forklift needs over 17 feet to come to a full stop. At 8 MPH, it needs 42 feet. Of course, this will vary between machines, so use a calculator to find out how much stopping distance is needed.

Failure to take these factors in mind increases the risk of safety hazards. For one, you could hit people, equipment, or infrastructure. In fact, workers getting hit by forklifts is one of the top causes of lift-truck-related work injuries. When you speed, you risk losing control of the vehicle, not seeing obstacles in time, and tipping over.

This can not only result in tragic accidents but costly fines, penalties, and losses. For example, you may be required to pay OSHA fines, incur expensive medical and legal bills, suffer costly downtime, and damage your reputation among employees and customers.

Setting a forklift speed limit is a balancing act. You want to prioritize safety, but you also want to meet your production goals. Often, the two work against each other. The faster you drive, the faster you can work, but the more dangerous the work becomes.

Our recommendation is to err on the side of caution. It’s better to take things slow than to risk a serious accident that could lead to someone getting hurt or worse and put you behind schedule.

When setting your speed limit, here are some things to consider:

The simplest way you can slow forklift speeds is to properly train operators. This should teach how to drive slowly and with caution, use your horn to alert others of your position, check your blind posts, keep a reasonable stopping distance, maintain a clear view, carry loads low to the ground, and obey traffic laws when driving on regular roads. You can develop an in-house program or outsource it to a professional

Once you have forklift speed regulations in place, you need to enforce them by warning and disciplining noncompliant operators. Of course, there are ways you can be encouraging, too. For example, you could set up speed limit signs across the warehouse, even radar ones that flash “slow down” when passing forklifts exceed the speed limit.

You can apply physical impairments, like speed bumps, or even install mechanical or electronic forklift speed controls. These devices force forklifts to stay under a custom speed limit that you set.

Whatever you do, make forklift safety a priority across the company so everyone knows what’s expected.

According to Fortune Business Insights, the global market for forklift trucks was 1.4 million units in 2021 and is projected to reach 1.9 million units in 2028, growing at a compound annual growth rate (CAGR) of 4.3%.

Warehouses use forklifts to move stock, businesses use them to load and unload cargo trucks, and retailers use them to pick orders. And, as the world increasingly adopts ecommerce, the need for forklifts will continue to grow.

However, with all the benefits that forklifts bring to businesses come some risks. If used incorrectly, forklifts can lead to serious consequences.

Fortunately, such accidents can be avoided. Keep reading to learn how much weight a forklift can handle, the risks to equipment and stock of overloading a forklift, the potential injuries caused by overloaded forklifts, and what to do if a forklift tips over.

The necessity of forklift safety isn’t necessarily the easiest to understand. That’s why many warehouses struggle to draw a line between productive shortcuts and recommended best practices, asking questions like:

Forklifts vary widely in their load capacity. On the low end, some forklifts can carry only up to about 3,000 lbs. On the high end, some forklifts can hold up to over 50,000 lbs.

As a forklift driver, it’s your job to know your forklift’s load capacity and stick to it.

Once you’ve established how much your forklift can lift, ensure that your load is under the limit. You can usually do this by reading the load’s label. If not, you may need to manually weigh it with a scale. Most forklifts have a scale built into them so you can quickly detect if a load is too heavy.

Whatever you do, don’t make guesses about the weight. It’s always better to double check to ensure you don’t overburden the forklift.

Why? Forklifts operate under a counterbalance system. The weight of the truck on the rear axle typically offsets whatever the weight of the carried load is. If the forklift is off balance because the carried load is too heavy, there’s a risk it will tip over and injure the driver or other workers and cause damage to the forklift and load.

Ready to up your weight capacity with a new forklift? HTX is Texas’s leading provider of forklift equipment, offering a wide selection from top manufacturers.

Here’s how your stock or forklift could get damaged through overloading:

If the load is fragile and hits the ground hard enough under all its own weight, it could get ruined. The same goes for the forklift. It could tip over and land on its side or back, which could cause serious damage to the machine.

Both scenarios could lead to expensive losses and repairs, which would ultimately hurt your bottom line.

Worse than damaged goods or machines are forklift injuries and fatalities. According to the National Safety Council (NSC), forklifts were the source of 7,290 nonfatal injuries in 2020. Here are the main ways that people end up hurt by overloaded forklifts:

1. Being inside a forklift that tips over: If an overloaded forklift flips over while you’re in it, you could end up seriously hurt by the fall, stuck inside the machine, or worst of all, crushed between the forklift and the ground.

To prevent this from happening, always wear a seatbelt, avoid tilting the forklift too far forward or backward, use extreme caution on inclines and ramps, avoid sharp turns, and drive slowly.

2. Getting hit by a forklift: Another way an overloaded forklift could hurt or kill someone is by hitting them. That is, the impact of the heavy forklift running into another worker could lead to injury.

To prevent hitting anyone with the forklift, try not to drive near other workers, follow designated driving routes, obey all safety rules such as speed limits and traffic signs, sound your horn to alert others where you are, and look both ways at intersections.

3. Getting crushed or run over by a forklift: Most forklifts weigh several thousand pounds. As a result, one of the most common causes of forklift deaths is getting crushed by one.

To help prevent this from happening, always wear a seatbelt, never allow workers to ride on the forks or on top of the forklift, stay inside of the operator’s compartment at all times while driving, and always check the route for hazards.

At the end of the day, overloaded forklifts are an unnecessary cause of injury and death. What makes forklift accidents especially tragic is that they are avoidable.

So, don’t let your forklift drivers make reckless mistakes. Train them well and make forklift safety a top priority for your business.

Did the delicate balancing act between your forklift’s weight capacity and your ambition fall through? Don’t panic. While you may be tempted to jump out of the vehicle, this may not be the best response since you don’t know how the forklift will land. Instead, remain calm and keep your hands firmly on the wheel. Try to position yourself in the opposite direction of the fall and brace yourself for impact. As soon as the forklift has completely fallen over, call for help.

Hopefully, you’re able to exit the vehicle safely and you can report the accident to your supervisors. Otherwise, get emergency responders on the scene as soon as possible and first aid if needed.

Lift trucks can be extremely useful. They can help you transport heavy loads to and from loading docks, storage areas, retail floors, work sites, and more.

But this equipment can also be dangerous, especially outside, as forklift operators need to stay cautious of potential hazards.

In this article, we’ll go over eight tips on how to safely operate a forklift outdoors.

Let’s get started.

Before you operate a forklift outside, it’s important to check the weather forecast. If the weather looks bad (or is expected to get worse), you may want to rethink operating a forklift.

Rain and snow can make the ground slippery or muddy, and fog could make it difficult to see. In some cases, a storm could even damage the forklift, and seasonal factors could impact the forklift’s ability to operate at all.

So, try to schedule the forklift job for when the weather is clear. That might mean postponing the task. Just remember that it’s better to be safe than sorry.

Next, it’s important to make sure you are using the proper gear and equipment.

If the weather is cold, wear warm clothing like a coat, gloves, and a hat. If there’s a lot of sunlight, be sure to wear some sunscreen. And you should always wear protective gear like a reflective vest and helmet.

As for equipment, make sure you have the right forklift for the job. It should be able to handle rough terrain. So you may need to weatherize it by equipping it with all-season tires, for example. Check out our lift trucks page to explore some of our outdoor forklifts for sale and rent.

Any time you get into a forklift, you should inspect it. Here are some things to check:

Other items to check include screens, lights, hydraulics, steering, and other attachments. Do all of this before you start driving the forklift.

When loading an outdoor forklift, make sure the load is stable so that it doesn’t fall over. For example, you don’t want to overload the forklift. Check its weight capacity and stick to it. You also don’t want to carry an off-center load. Stack crates and boxes evenly. And lastly, avoid carrying damaged or loose loads, which are at a higher risk of falling off as well.

While operating the forklift outside, the number one safety rule is to stay alert.

This means staying focused on the job at hand by eliminating distractions, constantly checking your surroundings, and keeping an eye out for other workers, obstacles, and even wildlife.

Driving a forklift outside is different from driving one inside because you aren’t in a contained environment. You need to stay alert to manage the increased risks. Anything could happen.

Operating forklifts is a dangerous job, not immune to safety hazards. Which, if left unchecked, can cause serious damages. Luckily, a safety checklist helps keep your workplace incident free.

One big difference between indoor and outdoor forklift driving is the terrain. Outside, you may face unsmooth surfaces (e.g. gravel and rocks) and more inclines and declines (e.g. hills and ramps).

As a result, you need to monitor the terrain. Watch for uneven surfaces, slopes, and gaps so you don’t slide or tip over the forklift. That way, you lower the risk of seriously injuring yourself and others and causing damage to the forklift or other equipment.

Keep in mind that the terrain could also change suddenly. For example, in transition areas between indoor and outdoor environments, there may be sudden changes in surface (e.g. smooth to rough) and even lighting (e.g. light to dark).

Learn how to navigate these tricky areas by practicing driving in them. Train yourself to slow down and carefully maneuver the forklift so you don’t run into any problems.

Communication is vital in forklift driving, especially outside. It allows you to alert fellow workers about your forklift position, driving direction, changing conditions, and sudden hazards.Forklifts are heavy pieces of equipment, after all.

By communicating with other workers while you drive, you can lower the risk of a job site accident and avoid serious damage or injury. Others can help you drive a forklift safely by communicating with you as well.

For example, they might watch your blind spot for you or give you a heads-up about an obstacle in your way.

Ultimately, great communication is the key to keeping everyone safe around outdoor forklifts.

One last, often neglected step of safe outdoor forklift driving is keeping your forklift properly maintained. Regular maintenance is especially critical for outdoor forklifts because they are more susceptible to the elements, leading to faster wear and tear.

So maintain a regular maintenance schedule for your outdoor forklifts. Clean them often to prevent rust, oxidation, and damage from salt exposure. You may also want to check the hydraulics occasionally and attend to any engine or warning lights. Doing so helps ensure your outdoor forklift stays in working order and lasts longer.

HTX Material Handling is Texas’s leading provider of lift trucks, parts, rentals, and more. If you need a durable, strong outdoor forklift to withstand an even tougher workspace, HTX Material Handling can help.

 As a business owner, you can’t afford to make many mistakes at the receiving stage because this will lead to issues downstream, such as stock control issues, higher operational costs, and faulty orders delivered to customers.

That’s why it’s important to handle inventory right from the moment a shipment arrives. In this article, we’ll go over how to do just that.

Here are six ways to better improve your warehouse receiving process:

To set your business up for success, you first need to determine what metrics to measure to evaluate warehouse worker performance, detect bottlenecks, and make improvements over time.

Some common key performance indicators (KPIs) that you should consider tracking include:

By keeping track of metrics such as these, you can see how well your receiving team is performing and where it can improve.

Before you make inventory orders, it’s important to establish pre-receiving requirements for suppliers and shippers to follow.

For example, you may want shippers to load the cargo in reverse order of the delivery schedule so that your receiving team can immediately put away inventory as they unload it. This way, they don’t have to sort through it first, leading to a more efficient system.

Another pre-receiving requirement you should have is a well-defined labeling structure. You may have specific requirements for what information is included on labels and where they are positioned on packages.

Just be sure to provide shippers all the proper documentation for labels upfront, and double check it to ensure it’s accurate. Do this in advance so that the receiving process runs smoothly later.

You may also want to define the number of packages allowed per pallet, the number of items allowed per carton, and an acceptable package size and weight range.

When it’s time to receive the inventory, you can then use barcoding, RFID scanners, and other technologies to quickly scan labels and see the content and quantity of what you are receiving.

In order to handle warehouse receiving and incoming inventory, you need to staff appropriately. Labor may be your largest warehouse operating expense, but it’s not something you can afford to skimp on.

Be sure to align worker schedules with the receiving schedules so that you always have enough staff on-site to receive deliveries. Being understaffed will only hurt your business operations in the long run.

Once you’ve received an inventory order, take an exact product count. You can use an inventory scanner system to help automate this process.

Then, open every package and perform a thorough inspection. Check the overall conditions of products. Look for broken seals, lost items, damaged products, mismatches in product SKU, and other discrepancies.

Inspecting inventory is an essential aspect of warehouse receiving, as it helps ensure faulty products don’t reach your customers. Don’t let the inventory clerk sign off on a shipment until they’ve had all packages checked and rechecked. If there are any concerns or questions regarding the shipment, the inventory clerk should voice them.

When it comes to actually putting away inventory, you need to make sure you have a team equipped to do some heavy lifting. This means they should not only have the physical strength to carry heavy loads but the right machinery.

Here at HTX Material Handling, we offer several types of receiving and handling equipment to help you work faster. From forklifts and lift trucks to electrical tugs, and more, we’ve got what you need.

Your warehouse receiving team needs to have a system for filling and storing products in an efficient way.

For example, you might have them store inventory on palettes, on shelves, or in bins. Whatever the case may be, make sure it’s a cost-efficient use of space that helps you save on carrying expenses.

One way to optimize your filing and storing system is to digitize it with software. The right software system can help direct putaway routes and ensure you maintain a FEFO (first expired, first out) sequence.

Finally, it’s important to maintain a robust inventory replenishment system. Replenishment orders should process automatically, as inventory gets low and undercounts are detected in a shipment. That way, you can streamline the warehouse receiving procces an replace products quickly, meaning they’re less likely to be out of stock when you need them.

After all, you never want your customers to suffer as a result of an inventory mistake (e.g., by having to wait for a backorder or by not being able to order at all). Instead, you want to take a proactive approach to prevent such issues in the first place.

Warehouse receiving isn’t a piece of cake. It takes an entire team dedicated to optimizing processes and always improving. Start small and learn as you go.

At the end of the day, any practice that can help you streamline receiving will help increase your bottom line. How? By boosting productivity and lowering operational costs.

If you’re ready to take your receiving process to the next level, consider getting more efficient equipment as part of your plan. Feel free to reach out to us today to discuss your needs. We look forward to chatting!

Electric tuggers are quickly becoming the go-to solution for efficient material handling. But with an array of options available, selecting the right one for your specific needs can feel like a challenge. In this blog, we’ll equip you with all the knowledge you need to make an informed decision and enhance your operations.

Ever wished there was an easier way to move heavy loads around your workplace? With an electric tugger, there is! Also known by names like electric tow trucks or industrial tuggers, these are battery-powered machines designed to effortlessly tow and maneuver wheeled loads.

Imagine a powerful, compact electric vehicle specifically built to pull carts, trailers, and other equipment. That’s the essence of an electric tugger. They bridge the gap between manual labor and heavy-duty forklifts, providing a safe and efficient solution for various tasks.

The core functionality of these machines is deceptively simple. Here’s a quick breakdown of how they work:

Electric tuggers offer a multitude of advantages that can transform your workplace. Let’s explore the benefits that make electric tuggers a winning investment.

Manual handling of heavy loads is a leading cause of workplace injuries. Electric tuggers eliminate this risk by taking the strain off workers. They safely tow and maneuver heavy objects, reducing the potential for muscle strain, back injuries, and repetitive stress disorders.

Time is money, and electric tuggers help you save both. They expedite material movement by effortlessly transporting loads, reducing turnaround times, and keeping operations flowing smoothly. Imagine the time saved compared to manually pushing or pulling heavy carts and pallets!

Electric tuggers free up your workforce to focus on higher-value tasks. Instead of expending energy on manual labor, employees can devote their time to tasks that require skill and expertise. This improves overall productivity and can even boost employee morale and job satisfaction.

Electric tuggers are powered by batteries, eliminating harmful emissions and noise pollution typically associated with gas-powered machinery. This not only creates a cleaner and healthier work environment but also demonstrates your commitment to sustainability.

While electric tuggers offer significant benefits, they come at a fraction of the cost of powered industrial trucks, i.e. forklifts. Their lower maintenance requirements and energy efficiency further enhance their cost-effectiveness, making them a smart financial decision for businesses of all sizes.

Looking to improve operations without breaking the bank? Discover how used equipment solutions from HTX Material Handling can help!

Electric tuggers are no longer niche machines. Instead, they’ve become the go-to solution for efficient, fork-free material handling across a wide range of industries. Their ability to effortlessly tow and maneuver heavy loads translates into improved productivity, reduced strain on workers, and a safer work environment.

Let’s take a look at some of the common applications of electric tuggers and the specific tasks they excel at.

Imagine a bustling manufacturing facility where raw materials, parts, and finished goods constantly move between workstations. Electric tuggers can play a crucial role in this fast-paced environment. They efficiently:

By eliminating the need for manual handling of heavy loads, electric tuggers ensure a smooth flow of materials, keeping production lines running efficiently.

Warehouses thrive on efficient movement of goods. Electric tuggers are perfectly suited for the dynamic environment of a warehouse, helping to:

Electric tuggers maximize storage space utilization by allowing for narrower aisles and efficient maneuvering around corners. This translates into faster retrieval times and improved overall warehouse productivity.

Construction sites are inherently demanding environments. Workers constantly move a variety of heavy materials, tools, and equipment. Electric tuggers can significantly improve efficiency and safety on these job sites by:

The compact size and maneuverability of electric tuggers make them ideal for navigating uneven tight spaces often found in manufacturing environments and warehousing. Additionally, by reducing manual strain associated with moving heavy objects, electric tuggers help prevent worker injuries and fatigue.

Large retail stores deal with a constant flow of merchandise. Electric tuggers can significantly enhance efficiency in these environments by:

Electric tuggers help maintain a clean and organized shopping environment, improving customer satisfaction and staff productivity. Their compact size allows for easy navigation through busy aisles, ensuring smooth and efficient stock movement.

Now that you have a better understanding of electric tuggers, you might be wondering which brand to choose. At HTX Material Handling, we recommend that you look no further than MasterMover®.

With a rich history of delivering top-notch equipment, MasterMover® has earned its reputation as a reliable partner for businesses seeking excellence in their operations. As a leading innovator and manufacturer of premium electric tuggers, they offer:

Investing in a MasterMover® electric tugger is more than just acquiring a machine. In reality, it’s a strategic decision that pays off in the long run. When you purchase these machines, you can unlock a new level of efficiency, safety, and productivity in your workplace.

Ready to transform your material handling operations? HTX Material Handling offers a wide range of MasterMover® models to perfectly match your specific needs. From light-duty applications to heavy-duty industrial environments, we can help you do it all.

Contact HTX today and discover how MasterMover® electric tuggers can revolutionize your workplace!

Determining which type of tugger is best for your warehouse or material handling environment doesn’t need to be a challenge. Here are a few tips to help you determine which will work best for your operations.

At the end of the day, the choice is up to you. Do your due diligence and you’ll be able to find the right electric tugger for you in no time. Feel free to reach out to us if you have any questions!

Forklift owners have a duty to maintain their equipment. Failing to do so could lead to costly malfunctions, unsafe work environments, and trouble with government regulators.

That said, forklift servicing and maintenance can get expensive fast. If forklift maintenance is eating away at your profit margins, keep reading to discover 10 ways to reduce maintenance costs.

A forklift can do a lot of damage if not operated properly. For example, it could collide with other property, damaging itself and other equipment. On top of that, the long-term effects of poor forklift driving can lead to more wear and tear, which also ramps up forklift maintenance costs.

This makes it important to train forklift operators on how to use the machine properly. To do this, you can conduct regular training and ensure your workers get OSHA certified.

Another way to lower forklift maintenance costs is to perform daily inspections before each use.

First, inspect the forklift visually by checking the wheels, seat belt, oil and gas levels (or battery level if electric), and other visible components. Then inspect the forklift operationally. Does the engine turn on? Do the lights, signals, wipers, horn, transmission, brakes, steering, and exhaust system all work as designed?

If so, the forklift is probably ready for use. If not, get it checked out first. Ignoring maintenance issues may lead to costly repairs later on.

Keeping the floors at work in good shape helps keep forklift maintenance costs down.

Bad floors can wear out the forklift faster. For example, if the floors have holes, uneven surfaces, debris, or other hazards, they will take a bigger toll on the forklift’s tires.

It pays to keep your work floors smooth and unobstructed as much as possible.

In addition, performing regular forklift maintenance may help lower your maintenance costs. This is because neglecting maintenance or doing it irregularly tends to lead to costly repairs and even equipment replacements.

For example, if you never change your forklift’s oil, you could end up ruining the engine, which costs much more to replace than it costs to perform regular oil changes.

You may also want to check and replace a forklift’s tires so you don’t accidentally end up damaging the wheels (especially since forklifts don’t have suspension).

Set up a forklift maintenance schedule and keep to it. A little preventative maintenance can save you a lot of money in the long run.

When it comes to repairs, you can save a lot of money by doing them in-house. A professional forklift mechanic may charge high prices for their services.

If it can be a small DIY repair, let it be. There’s no need to outsource what you can do yourself. Just make sure you actually know what you’re doing.

For example, if you need to replace a light on the forklift, verify what size bulb you need before you go out and buy a replacement. If you’re unsure how to swap out the old one for the new, look up instructions online.

Regular forklift cleaning is a great way to reduce wear and tear on your equipment. Explore our blog to learn more about how you keep your machine in good working order.

That said, some repairs are too big to handle on your own. In that case, it’s actually cheaper to hire professional help.If you try to fix something on your own, you may create further damage. In other words, you may do more harm than good.

For example, if the forklift’s transmission needs to be replaced, hiring a professional mechanic to fix it is probably the best maintenance strategy. Don’t create more maintenance costs by trying to skimp on needed repairs. Sometimes, hiring a professional is more cost effective.

There are many different forklift brands out there. But to save on maintenance costs, it helps to limit your forklifts to one or two manufacturers. This way, you don’t have to deal with many different companies for parts and you don’t need to train your workers how to operate different models of forklifts.

Do your research, choose a forklift manufacturer you like, and try to stick with them. Your forklifts will be much easier to manage and maintain that way.

Not every job requires a forklift, and if you use a forklift anyway, it may not be good for the machine. The improper use of a forklift will then lead to higher maintenance costs.

Instead of trying to do everything with a forklift, own different machines for different tasks. It may cost more upfront, but it’s worth it in the long run. Always try to match the truck to the job.

You may also consider investing in electric forklifts. They require no gas and are much easier and cheaper to maintain as a result.

Though electric forklifts may be more expensive than gas-powered ones, the long-term savings make them well worth the investment.

If you get an electric forklift, try to get one that uses lithium-ion batteries instead of lead acid ones. They require less upkeep and are less likely to overcharge.

An aerial lift is a vehicle-mounted device used to elevate construction or utility workers. It could be a scissor lift, man lift, or boom lift. These machines can serve as a convenient alternative to ladders, as they are much more dynamic and can be used in a variety of settings.

In this article, we’ll go over what an annual lift inspection is, why it’s important, what it involves, and more. Let’s get started!

An annual lift inspection is a yearly maintenance exercise in which a qualified operator makes sure that an aerial lift is working properly. This also allows for any potential issues to be repaired. If the machine is deemed unsafe to operate, it will be set aside until it is fixed.

Here are some of the many reasons owners should have their aerial lifts inspected every year:

For one, annual aerial lift inspections are required by the Occupational Safety and Health Administration (OSHA). OSHA adopts most of its aerial lift inspection requirements from the American National Standards Institute (ANSI).

ANSI requires that the annual inspection occur no later than 13 months from the date of the most recent yearly assessment (you can check the date posted on the lift to see when the last inspection occurred).

In addition, all aerial lift inspections must be performed by a “competent” person according to the manufacturer’s guidelines (check the aerial lift’s owner manual to find the manufacturer’s recommended inspection guidelines). A competent person is someone capable of inspecting the machine and identifying existing and predictable hazards on the worksite. They must also have authority to remove hazards and take prompt corrective measures.

If the inspector identifies any issues with the aerial lift or the worksite, operations must pause until the issue(s) is fixed. In some cases, that might mean taking the aerial lift out of commission until it is repaired.

Another reason to perform annual aerial lift inspections is worker safety.

According to the Center for Construction Research and Training (CPWR), an average of 26 construction workers die each year from using aerial lifts. This accounts for 2% to 3% of all construction deaths. Major causes of deaths related to aerial lifts include falls, electrocutions, and collapses or tipovers.

If the aerial lift is operating near pedestrians (e.g. in the city), pedestrians may also be at risk (albeit usually a lesser risk since they are not directly involved on the worksite).

By performing annual aerial lift inspections, you help ensure that the machine will operate properly and not cause a major accident.

Proper equipment maintenance is another reason to perform annual aerial lift inspections.

A thorough inspection can alert you to low fluid levels or a malfunctioning engine, for example. From there, you can quickly respond to these issues before they lead to costly equipment failures later on. This way, your aerial lifts will last longer and require less repairs overall.

In order to maintain a highly efficient warehouse or industrial facility, you need to ensure that your equipment is running properly throughout the year. Explore our blog to learn more about extending the lifespan of your industrial equipment.

A proper annual aerial lift inspection involves three parts: a visual inspection, a function test, and a work zone inspection. Let’s go over each aerial lift annual inspection requirement in more detail:

The visual inspection is a preliminary check of the aerial lift itself. It includes checking fluid levels and ensuring there are no leaks. This goes for the engine oil, battery fluid, coolant, and more.

The visual inspection also involves checking the wheels, tires, electrical wires and cables, battery levels (for electric models), safety rails and gates, and all other structural components.

Basically, you want to make sure that the aerial lift looks good from the outside.

The function test is your opportunity to make sure all the internal aerial lift functions work as intended. It involves testing all the controls and mechanisms of the vehicle (ground control testing) and of the attached platform (platform control testing).

For example, you want to make sure that the power shut-off button, the up and down controls, and the horn all work properly.

By checking each individual feature, you significantly reduce the risk of a malfunction occurring on the job.

Lastly, the work zone inspection is meant to clear the work area of any potential hazards.

At this stage of your annual lift inspection, you should walk around the worksite to identify any holes, unstable surfaces, inadequate ceiling heights, debris, and other obstacles.

The work zone inspection also involves checking weather conditions and ensuring no unauthorized personnel are onsite. If possible, try to remove or eliminate these hazards so that the aerial lift can operate safely and freely.

Though often neglected, the work zone inspection is a critical part of the overall aerial lift inspection that you can’t afford to skip.

To get an idea of what an annual lift inspection checklist might look like, here are the inspection checklist items aerial lift manufacturer JLG recommends for checking the functions and controls of a boom lift:

Create your own checklist and include the inspection of areas like platform assembly, boom assembly, turntable, chassis, power system, hydraulic/electrical system, manuals & decals, and other general items.

Annual lift inspections are an important owner responsibility. If you don’t take the initiative to perform them on a regular yearly cycle, your regulatory compliance, worker safety, and equipment will suffer.

If you haven’t already, implement annual lift inspections into your business today!

Every warehouse has a loading dock. It’s where trucks and other vehicles are loaded and unloaded with goods—whether those are raw materials like wood or end products like furniture.
To keep loading docks running optimally, you sometimes need to replace various loading dock equipment. This helps ensure productivity and worker safety.

In this article, we’ll go over the different types of dock equipment and the process you should follow when replacing them. Let’s get started!

You may be surprised to learn that loading docks are made up of many components. It’s important to know what they are so that you only replace what’s needed. Here they are:

Looking to extend the service life of your forklift? Regular cleaning and maintenance may be your answer.

Now that you know the different types of dock equipment, let’s go over how to replace them. Here’s a step-by-step guide:

1. Assess the existing equipment.

The first step is to assess the loading equipment you already have. Is it working properly? Does it get stuck or otherwise slow down the loading or unloading process? If so, it may be time for a replacement. You’ll also want to watch out for any signs of wear and tear as this may be another indicator of a pending malfunction or safety issue.

2. Choose the right replacement equipment.

Once you’ve identified which parts of your dock need to be replaced, you can determine what you need to replace it with: a new dock leveler, bumper, seal, etc. It’s also important to check the specific dimensions of your loading dock so you get the right size of replacement equipment. Then be sure to weigh factors like cost, safety features, and ease of maintenance in your purchase decision.

3. Prepare the loading dock site for installation.

At this point, you should prepare the dock station for installation. Clear it of any obstacles and make sure the ground is level and stable. This will help the installation go much smoother and ensure there are no safety issues.

4. Hire a loading dock professional to install the new equipment.

Shop around for a reputable loading dock professional who can install your new dock equipment for you. Don’t do it yourself unless you have experience with this type of work. Trying to learn how to install docking equipment on the job could lead to costly mistakes.

The time it takes to install the new equipment will vary, but a good professional will get the job done in a prompt and satisfactory manner. Once finished, they should show you how to operate the new equipment so you can teach your warehouse team how to use it.

5. Test the new dock equipment.

Once the equipment is installed, you should test it to make sure it works properly. You can run a test by having a truck back up to the loading dock. Proceed to connect with the truck via the dock leveler or board. The process should run smoothly. If there are any signs of malfunction, make note of them so that you can report them to the installer or the manufacturer. And don’t forget to check that the dock equipment safety features work properly!

6. Train employees on how to use the new dock equipment.

Now you’re ready to train your employees on how to use the new dock equipment. This is an important step since the new equipment won’t do you any good if nobody knows how to use it. Consider hosting a training session so that you can demonstrate proper use. Go over the new equipment’s operation, safety features, and proper maintenance. All of this is important for your warehouse staff to know.

Every industrial company has that one piece of equipment that seems to have stuck around forever. While your staff might love that ol’ reliable forklift, pallet jack, or aerial lift, rising maintenance costs will begin outweighing the benefits in due time. In this article, we will break down signs of when old forklifts and other warehouse equipment may need to be replaced, and why investing in new machinery is an excellent long-term option.

Facility managers need to keep all components of warehouse equipment in a functional condition to prevent operational efficiency from decreasing. Forklifts, pallet jacks, aerial lifts, warehouse racks, and tugs are all standard warehouse equipment businesses rely on daily. Here are common signs that show you need to replace a piece of equipment:

Many business managers attempt to stretch out the lifespan of their forklifts to reduce maintenance and replacement costs in the operating budget. Stretching the lifespan of forklifts can be dangerous if the process isn’t managed thoroughly. Although replacement is costly, there comes a point where it’s beneficial to replace old forklifts and invest in new technology. Let’s run through the major signs of when forklifts need to be replaced.

Operational managers should begin tracking maintenance costs for all equipment each quarter. This is the best way to know how machinery performs throughout its lifespan. If forklift maintenance costs are consistently rising each quarter, your business should consider replacing the old forklift with new technology. Costs will rise higher and faster the more a forklift ages. High annual expenditures for maintenance costs a company more than investing in new, reliable equipment.

Old forklifts used in extreme hot or cold temperatures deteriorate much quicker than machinery operated in controlled environments. Harsh conditions subject forklifts to noticeable corrosion buildup and chemical damage within internal components. Forklift hydraulics are the most affected component when working in extreme environments, requiring your business to invest more time in money for maintenance downtime.

Old forklifts can repeatedly break down or malfunction, costing companies more for repairing damage than simply replacing equipment. Failing machinery during operation can injure employees or other people, significantly increasing payment through insurance. If your forklift has failed before, don’t wait for another accident to consider a replacement. All parties benefit from safe, reliable equipment.

Forklift operators will see costs to maintain machinery rise around the 8,000-hour mark of logged service life. Tracking service hours, in addition to regular maintenance, will give managers an idea of the optimal time to begin planning for replacement. Replacement must be done by the 12,000-hour mark of service life, or whenever forklift repair costs become unreasonable.

Safety throughout all industrial and operational processes is a top priority for businesses. Forklifts repeatedly showing signs of mechanical issues or failure pose safety threats to employees and anyone else within range. Swapping old forklifts and investing in new machinery immediately eliminates any safety threats or damages to facility equipment.

Business managers should regularly monitor new technology available on the market, or else your company could be spending unnecessary funds. For example, if old forklifts still operate on outdated combustion engines, you’re likely paying a fortune for fuel. Recent fuel-efficient technology and electric forklifts have dramatically reduced the need for extensive gas demand. New additions to equipment also decrease the effort and time put in manually by forklift operators, allowing manpower to be allocated to other operational aspects. When considering replacing machinery, don’t just think about damage and lifespan. Be sure to consider how efficiently your forklifts are performing for service. 

With a provider like HTX Material Handling, new equipment across various lines is just a call away.

Still considering replacing old forklifts or other warehouse equipment for your facility? Check out some extra tips on industrial machinery maintenance.

Replacing aging forklifts with new technology has many benefits; your company saves considerable time and money by avoiding forklift repairs and downtime. Check out these benefits of investing in new machinery.

Forklift operators in your facility could put in extra manpower through ongoing processes with outdated technology. New forklifts with added features allow your staff to refocus efforts on other operational aspects.

Consistently performing technology without defects and malfunctions significantly reduces possible repair and damage expenses. New, reliable forklifts go a long way to increasing your operating efficiency.

With safe and reliable forklifts, businesses don’t have to worry about hazards to employee safety or costly warehouse damage. Relive any stress by investing in new technology.

Old forklifts aren’t the only piece of equipment that needs to be replaced in warehouses before costly damages occur. Industrial racks, lifts, and pallet jacks are other machinery that builds expensive repair toward the end of their service lifespan. Listed below are signs of when to replace additional warehouse equipment.

Pallet jacks boost the efficiency and speed of your workplace operations. Aging pallet jacks slow operational procedures and can harm operators. Business managers should replace machinery when oil leaks, scale problems, and damaged wheels are evident.

Aerial lifts on trucks are a big part of service for companies like HTX Material Handling. Consider replacing your lifts when:

Warehouse racks provide excellent support and organization to a facility. Racks are even designed to last years, but here are signs you need to replace them:

Most business managers already have to stretch tight budgets for operational procedures. That’s why you must be prepared to identify the right type of forklift required for a specific project before purchasing. With a provider like HTX Material Handling, you can choose between sit-down or stand-on forklifts.

In this article, we’ll cover the differences between stand-on and sit-down forklifts, the benefits of each, and the decision process to select the right type of machinery.

Stand-on forklifts are designed for operations and activities where workers frequently get on and off equipment. This type of machinery is excellent for loading and unloading processes. Stand-on forklifts are the best choice for navigating tight aisles and spaces. Stand-on forklifts are typically shorter, more compact, and have a sharp turning radius. This is the most accessible and maneuverable forklift in the industry.

Since operators are upright on stand-on machinery, it’s much easier to get off and on throughout procedures. Forklift drivers stand sideways on the equipment for improved visibility in either direction without constantly twisting their bodies. Outlined below, we will run through the benefits of purchasing and providing a stand-on forklift for your business environment:

Sit-down forklifts are efficient and productive machines for any business environment. Sit-down machinery is commonly used for high-volume applications like distribution centers and commercial warehouses.Three or four-wheel models are offered for this type of forklift. Three-wheel designs specialize in maneuvering tight spaces, but usually have reduced carry and lift capacities. Four-wheel machines are stable, durable, provide the highest weight capacity, and handle heavy loads.

Sit-down forklifts come in three or four-wheel model designs. This machinery is best used when forklift operators don’t need to get on and off throughout the process. Sit-down forklifts also provide added comfort for drivers. Let’s walk through the specifications of three- and four-wheel forklifts:

Determining your project specifications before buying a forklift is important for many reasons. At HTX Material Handling, we’ve got your business covered with a spectrum of options like sit-down or stand-up forklifts. Learn more about the capabilities of different forklifts. How much weight Can a forklift carry?

Buying the proper forklift model for your business significantly boosts safety and productivity. Business managers must weigh the pros and cons thoroughly throughout the research process. Keep these aspects in mind before making a purchase decision:

Each project site has a unique and different environment. For example, sit-down forklifts are optimal for uneven surfaces, while stand-on forklifts should be utilized on smooth floors. Always be sure to use the right model best tailored to your environment setting to prolong the life of your forklift.

Using sit-down forklifts for projects with extended durations provides better comfort to your workers. Always keep project length in mind before purchasing a forklift. Stand-on equipment is the recommended model if your business only needs the machinery for quick tasks.

Consider how tight of spaces forklifts will operate in your environment. If you need a model with a large turning radius, sit-down forklifts are the go-to option. If you need machinery to fit in narrow aisles, select stand-on forklifts.

At HTX Material Handling, we have the best forklifts for sale in Texas. With quality products, our vision is to create a new category of companies within the industry. HTX fills the void of accountability and customer focus in truck lift service support. Contact our team of experts today for the best equipment and machinery in Texas.

If your business has never bought a forklift, you may wonder what to look for in the research process. In this article, we’ll explain why used electric forklifts are an excellent choice for the price, what questions to ask before buying, and provide a checklist for consideration before purchasing. Here’s everything you need to know about buying pre-owned forklifts.

Used electric forklifts are a great cost-saving option for companies on a budget. Pre-owned machinery can be acquired at half the price, and quality used electric forklifts with warranties can be purchased for around $20,000. Cheaper pre-owned forklifts with a substantial operational history can be bought for $10,000 to $15,000.

Compared to new models with the latest technology costing between $25,000 to $45,000, used forklifts can deliver intended goals at a fraction of the price.

Inflation has skyrocketed in 2022. Many commercial businesses may not be able to afford the cost of the latest version on the market. There’s good news—with thorough research and inspection, companies can acquire quality used electric forklifts at a fraction of the cost.

Most forklifts require little maintenance over time. Older, less complex models have less attachment technology that need upkeep. If you need replacement parts for pre-owned forklifts, more components across various models are easy to find on the market.

A reduced cost is a top factor for purchasing a pre-owned forklift. Businesses can instead allocate a bigger portion of their savings to equipment maintenance or other areas of the operating budget. Companies can even get two for the price of one with careful research; oftentimes, pre-owned forklifts are half the price of new models.

Older models have already been put to the test. With occasional maintenance, operators know what they have with their trustworthy, ol’ reliable forklift. Businesses can still use older models for additional support or backup help if you have recently acquired a newer model.

Operators can expect to use older systems without additional training thanks to prior years of experience. Companies can save time and money by decreasing training with familiarized equipment.

Don’t waste valuable business assets buying fancy, expensive equipment when used electric forklifts do the job. Contact HTX Material Handling for quality and reliable pre-owned forklifts.  

Your company may be looking to purchase a used electric forklift. Pre-owned machinery has cheaper up-front costs with proven and reliable performances. Used forklifts are an excellent option to reduce operating expenses.

There are many pros to acquiring pre-owned forklifts, but that’s only after businesses conduct thorough research and inspection. We’ll walk you through the most important questions to ask manufacturers and other parties before making a purchase decision below:

Many interested parties only think to ask about operational time usage during the process of buying a used forklift. Think much deeper about the overall work history when considering purchasing a pre-owned forklift. Different forklifts for specific projects carry various ranges of weight. One pre-owned lift may have been utilized in significantly hotter or colder environments than another, wearing down components quicker. Be sure to get a full-detailed analysis of performance history in the research stage.

Obviously, you will be looking for a forklift in good condition. Asking manufacturers and third parties about maintenance and service history confirms the upstanding condition.

Potential buyers surrender the ability to acquire custom-made components on forklifts when buying pre-owned models over the latest technology. That’s why asking about potential attachments on used electric forklifts from the seller is valuable to get closer to your project requirements.

Buying machinery with a warranty is wise to avoid unexpected repair and possible replacement costs. Always ask about warranties from the third party before purchase.

Another obvious point, but a must. Ask the seller to test driver pre-owned forklifts to see the machinery in action.

Asking manufacturers and third parties all the questions above is a great start to buying the optimal pre-owned forklift. Prospective buyers also have to ask themselves questions to make sure they have the right piece of equipment for the intended project use:

There are different versions available for specific project uses. Be sure to acquire the right forklift for your environment and avoid spending unnecessary costs on fancy equipment.

Businesses and operational managers must define an ideal lifespan of a potential forklift for the intended usage. Managers must target equipment that will get the job done- nothing more, nothing less.

HTX Material Handling consistently provides Texas with high-quality used equipment. Since opening our doors in 2019, our top priority has been our service; our interest is your interest. Reach out to our team of experts for the best-used electric forklifts today.

If you’re looking to extend the service life of your forklift, regular cleaning and maintenance may be your answer. Keep reading to learn more about forklift cleaning and maintenance and how it can benefit your machine.

When you think about servicing your forklift, you likely consider tasks like changing the oil, rotating the tires, or inspecting the forks themselves. Forklift cleaning is often overlooked—but it’s an essential part of maintenance. Below, we’ll explore some of the ways you can extend the life of your machine with forklift cleaning.

Forklift maintenance and cleaning don’t have to be complicated. In fact, they can actually be rather simple with the right tools and proper attention to detail. Following this forklift cleaning checklist will help keep your machine in good working order, but make sure to refer back to your manufacturer’s recommendations for specific maintenance and cleaning instructions.

Whenever you’re working with a forklift, it’s important to maintain good safety practices. Even forklift maintenance and cleaning has its hazards—dirt and debris can be forcefully dislodged, and there could be hazardous materials on your machine depending on your industry.

When cleaning your forklift, make sure to wear goggles, gloves, and rubber boots. The goggles and gloves will protect your eyes and hands from hazardous materials and flying debris, and the boots will keep your feet dry. Try to cover up your skin as much as possible. You can wear pants and a long sleeve shirt to prevent hazardous materials from making contact.

Next, take some time to clear out the console of your forklift. There may be bits of trash, pens and paper, or other items cluttering the console and flooring. Removing these items from the inside of the forklift creates a clean space for the forklift operator to use the machine without distractions.

Depending on your industry, your forklift will accumulate varying amounts of dirt, caked-on mud, or grime. And, depending on how your machine is powered, you’ll need to employ various cleaning techniques.

For electric forklifts and lift trucks, you can use a broom to remove dirt and dust from the exterior. For debris and grime that are more difficult to remove, use an air compressor to dislodge them. You can also carefully wipe down the exterior of your forklift with a non-toxic, biodegradable cleaning solution. However, because you’re cleaning an electrically-powered machine, you need to be extremely careful to not expose electrical components to water or fluid.

For internal combustion forklifts, use a pressure washer to dislodge all of the dirt, dust, and grime from the exterior. Pressure washers are the perfect cleaning tool for this forklift—they prevent the operator from getting too close to hazardous runoff, flying debris, or splash-back.

Regardless of the type of machine that you’re cleaning, you need to be extremely careful and meticulous. Many forklifts have bearings with lifetime lubrication that cleaning solutions and steam can disrupt. If the lubrication is allowed to escape, the bearings will be irreparably damaged.

When cleaning your forklift, make sure that you use a top-down approach. Gravity causes debris and weather to fall and flow downward, so if you start at the top, you won’t have to clean the same areas more than once. You can also make the cleaning process easier for yourself by pre-soaking your forklift with water. This will loosen up caked-on debris and grime and make it easier to dislodge.

The undercarriage of your forklift is often forgotten, but just like the rest of your machine, it collects debris and grime and needs to be cleaned. When wiping down and pressure washing your forklift, make sure to pay attention to the undercarriage. You can spray off caked-on debris and wipe this area down as well.

After you clean your forklift, make sure you give it time to fully dry before you operate it again. Use a clean cloth and air compressor to remove excess water from all of the surfaces and crevices. This step of the cleaning process is important because internal moisture can damage your machine, especially its moving parts.

For the best results, you should clean your forklift at the end of a shift so that it can dry for multiple hours.

Proper forklift fleet management helps you improve your warehouse efficiency and productivity. Explore our blog to learn more.

Cleaning your forklift regularly benefits both your machine and your business. Below, you’ll find three important benefits of regular forklift cleaning.

If you keep your forklift clean, you can avoid buildups of dirt and debris which can damage your machine via wear and tear. By preventing this type of damage, you can save money on maintenance costs and part replacement.

Regular forklift maintenance and cleaning ensure that your machine stays in good condition. With regular cleaning, you can prevent rust, corrosion, blockages, and fire hazards. This helps reduce the likelihood of accidents and injuries while operating your forklift.

Regular forklift cleaning prevents rust and corrosion, and it also prevents dirt and debris from damaging the inner mechanisms of your machine. If you prevent your machine from taking passive damage, it’ll last longer.

On top of regular cleaning, maintaining a consistent maintenance schedule for your forklift makes sure it stays in tip-top shape. Preventative maintenance includes daily inspections, weekly inspections, and monthly inspections. Here are some things you should keep an eye on to ensure that your forklift is in good working order.

While this preventative maintenance checklist is a great place to start, it is not an exhaustive list. Your manufacturer recommendations will provide you with the required service intervals for each component of your forklift.

To get the most out of your forklifts, you need a comprehensive forklift maintenance program. At HTX Material Handling, that’s our specialty. We provide our customers with forklift maintenance programs that prevent costly breakdowns, injuries, or machine malfunctions while keeping your machine running optimally.

Contact us today to learn more about our forklift maintenance and services.

Forklifts are an essential component of your warehouse. They help move loads of material from one end of the warehouse to another with ease and efficiency—but did you know you can further improve your productivity by integrating forklift attachments? Keep reading to learn more about the many types of forklift attachments and their use in specific warehouse operations.

There are many types of forklift attachments. Each one of them allows you to alter the abilities of your forklift or lift truck, providing a higher degree of specialization for your warehouse tasks. Below, you’ll find a list of some of the most common types of forklift attachments and how they’re used to help your business.

Side shifters are a commonly used attachment that allow the forklift operator to move products side to side while they’re being transported. If a load is not aligned properly, this lets the operator correct any imbalance without having to get out of their seat. Side shifters improve the speed and efficiency of transporting materials and reduce the amount of wear and tear on the forklift itself.

If you work with a variety of pallet sizes and materials, fork positioners are the perfect forklift attachment. This tool automatically adjusts the width of the forks to accommodate varying pallet sizes. This automatic process is another way that forklift operators can improve their speed and efficiency.

Clamps are an important forklift attachment that allow you to safely move products that can’t be transported by pallet. Clamps wrap around the sides of the product, rather than supporting it from its underside. Washers, dryers, and refrigerators are great examples of materials that need to be moved using a forklift clamp.

Forklift spreaders are an attachment that reduce the risk of damaging heavy material that has a tendency to bend under its own weight. Forklift spreaders distribute the weight of the material over a larger area, allowing the material to be better supported. Spreaders are great to use when transporting heavy plasterboard, metal sheeting, or timber.

If your warehouse deals with a lot of fabric, carpet poles are the perfect attachment for your forklift. Carpet poles are long, thin attachments with tapered tips that allow the operator to pick up carpets, rugs, or rolls of material from their central core. They can then be transported from one location to another with ease.

Cylinder caddies are a type of forklift attachment that make transporting tanks of liquid or gas, like propane, safe and efficient. Using a combination of chains and steel supports, this forklift attachment secures the tanks in place allowing the forklift operator to transport multiple containers at a time without fear of disrupting the internal contents of the containers.

Fork extensions are an important tool that increase the amount of carrying space on a forklift. This lets the operator carry larger loads of materials. Although forklift extensions are a great tool to have, they should not exceed more than 1.5 times the standard length of the forks. This prevents the load from being too front heavy, which can cause the forklift to tip over.

Fork-mounted drum handling attachments allow a forklift operator to pick up plastic or steel drums with ease. They come in a variety of configurations, such as grabbers, lifters, and carriers. Although fork-mounted drum handling attachments are similar to forklift clamps, they are specifically designed to fit 30- and 50-gallon drums.

For warehouses with a high volume of products, multiple load handlers are a great attachment for forklifts. This attachment allows the operator to carry multiple pallet loads at a time, which increases efficiency. Multiple load handlers can expand the forklift capacity to either two or three pallets at a time.

Masts are ideal forklift attachments for lifting materials high off the ground. This variety of configurations of this forklift attachment allow the operator to lift material to greater heights. Masts come in single-stage, two-stage, three-stage, and four-stage options. This attachment circumvents the need to purchase or rent a forklift with a large mast.

To determine which forklift attachments are most suitable for your warehouse, you’ll need to ask the few key questions outlined below.

To ensure proper forklift safety, you need to know the maximum load capacity that you’ll be transporting. Forklift attachments can alter the maximum load capacity of your forklift, so you need to be sure it can handle the weight of the material you’re moving before you purchase anything.

Knowing how high you plan to hoist materials can also help you determine what attachments are best for your warehouse. For example, if you have three layers of racks, you’ll need at least a three-stage mast attachment. It’s important to keep in mind, however, that adding attachments to your forklift can change how the load weight is distributed. If your forklift is unstable, it can tip over and injure employees or damage materials.

When you install new forklift attachments, it’s possible that you’ll be required to provide extra training so that the forklift can be operated safely. Training and certification can be expensive, and your employees might have to take time out of their day to become certified on the new equipment. Keep these in mind when considering adding attachments.

If you’re looking for forklift rentals in Houston or in Dallas, HTX Material Handling can provide you with high-quality equipment for your warehouse. We’re dedicated to providing you with superior service, support, and equipment, and we can help you determine which forklift and lift truck attachments work best for your warehouse.

Contact us today to learn more about our equipment and services.

Do you know when it’s the right time to use an electric pallet jack vs. a manual pallet jack? These two pieces of equipment have similar functions, but when you need to use one or the other can vary. Keep reading to learn more about the differences between electric and manual pallet jacks and discover how they help your warehouse stay productive and efficient.

Pallet jacks are an essential piece of equipment for any warehouse or material handling business. They allow you to move pallets throughout your warehouse with ease and efficiency. And although pallet jacks have a smaller lift capacity than forklifts, they are able to be used in much smaller spaces. This allows them to deliver goods to any area within the warehouse, regardless of size or space.

You may find yourself confused about the terminology used to describe pallet jacks. What’s the difference between a pallet jack vs. a pallet truck? Well, they’re actually the same—pallet truck is just another name for a pallet jack. They’re also commonly referred to as pallet pumps, pump trucks, and hand trucks.

There are two types of pallet jacks, manual and electric, and they each have their strengths, weaknesses, and specific uses within a warehouse operation.

Manual pallet jacks are hand-powered tools that allow you to pick up and transport pallets throughout your warehouse. Manual jacks operate similarly to how a car jack works. After sliding the prongs underneath the pallet that you intend to move, you manually pump the handle to make the pallet rise off the floor. Once you’ve reached your intended location within the warehouse, all you need to do is squeeze the trigger on the handle to lower the jack.

One of the biggest advantages of manual pallet jacks is that they don’t require any additional training to operate since there are no electrical components or hydraulic pumps. Using a manual hand truck allows any one of your warehouse employees to move pallets from point A to point B.

Another advantage of manual pallet trucks is that they’re smaller than electric pallet trucks. This allows them to navigate small spaces within your warehouse that your forklifts and electric jacks can’t access. Because of their sleek design, they can be easily stored underneath stored pallets while not in use.

Despite the fact that manual pallet trucks lack electric motors, they boast an impressive lift capacity. Most manual pallet trucks allow you to lift and move upwards of 5,500 lbs.

Finally, manual pallet trucks are less expensive to buy, use, and maintain than electric pallet trucks.

Despite their versatility, manual jacks do have a few disadvantages. Because they are manually powered, they’re not ideal for mid- to long-range runs in your warehouse, and frequent use can quickly strain and tire out the operator. This can increase the chance of injury over time.

In addition, the many advantages of manual jacks make them a highly sought-after piece of equipment, so you might actually have trouble finding one when you need it.

Electric pallet jacks perform the same function as manual jacks, except they’re powered by an electrical motor and are slightly larger. They also use hydraulic pumps to lift pallets, which reduces strain on the operator.

Like manual jacks, electric jacks are extremely versatile pieces of equipment. Because they are powered by an electric motor and use a hydraulic pump, they can lift heavier loads than manual jacks. Many electric pallet trucks can lift and move up to 6,000 lbs.

Electric jacks also have a similar function to forklifts. They are able to lift loads much higher than manual jacks, which allows you to transport pallets to a broader range of locations in your warehouse.

Motorized pallet trucks also allow you to transport heavy loads much more quickly than their manual counterparts. This crucial advantage enables you to greatly increase your productivity and efficiency, especially in large warehouses.

Now that you know the pros and cons of each type of pallet jack, let’s explore when to use each type of pallet jack.

Manual jacks are perfect for traversing short distances and transporting pallets that aren’t especially heavy. Because they aren’t motorized, repeated heavy use can quickly tire out and strain your operator. However, manual jacks are ideal for navigating small, narrow spaces in your warehouse.

Because of their smaller size and versatility, manual jacks are the perfect addition to any retail warehouse, cold storage facility, or general warehouse environment.

On the other hand, electric jacks are ideal for mid- to long-distance runs, especially in larger warehouse facilities. Their electric motor makes it easy to traverse long distances quickly, meaning you can transport materials much faster without tiring out your operator.

Electric jacks are also great for transporting materials over uneven ground and sloped surfaces. Unlike manual jacks, which require that the operator physically maintain the stability of the load, electric jacks feature electric brakes and anti-rollback systems that prevent the load from becoming unstable on uneven ground.

If you’re looking to rent or purchase a pallet jack for your warehouse, HTX Material Handling is your go-to choice for premium service, support, and equipment. We’ll help you determine which type of pallet jack is right for your warehouse so you can maximize your productivity and efficiency.

Contact us today to learn more about our warehouse equipment solutions.

How materials are handled matters, but it’s not just about how they’re moved around. Everything from the building layout to employee training plays a role in improving efficiency and productivity for your business.

Material handling is the process of controlling the movement and storage of materials throughout the life of the material, beginning with manufacturing and warehousing and ending with distribution and disposal.

Handling materials requires intricate processes to preserve the integrity and quality of the materials. When executed properly, materials are stored and transported safely in a way that minimizes accidents and damage to the materials.

What’s the importance of material handling? Material handling matters because it impacts business operations. An efficient material handling process will have a positive impact, while an inefficient or unsafe process will have a negative impact.

For example, when products are moved and stored efficiently, they’re available when needed, orders can be processed faster, and it’s easier to keep an accurate inventory. This supports a business’ bottom line.

Another factor regarding the importance of material handling matters is safety. While it’s important to teach workers to safely use equipment, there are more skills involved. Workers also need to recognize safe clearances, avoid other workers, and secure their loads properly.

Proper training is important for preventing injuries, no matter how minor. Every day, over 200 material handlers experience a cut that qualifies for being reported. Cuts are common because workers are constantly removing straps with blades, cutting open taped boxes, and cutting wire and rope. Material handling best practices can reduce the potential for accidents and damaged materials.

Although handling of actual materials is easy to understand, there’s another aspect to material handling that plays an equal role: warehouse design and systems. These components contribute to material handling best practices.

How a warehouse or other storage area is designed impacts the workflow of handling materials. For instance, the width and length of aisles, the height and spacing of shelving, and where shelves and other storage spaces are located throughout the warehouse. A well-designed warehouse will be built to facilitate a quick flow from unloading to storage and retrieval for orders.

How materials are moved from one location to another matters. An efficient process will move materials quickly and safely, avoiding damage to the materials. This requires maintaining safe and efficient conveyor systems. The same is true for material storage. Some materials can be stacked, but others can’t. Sometimes there’s a weight limit for stacks, and other times limits are for worker safety.

A storage facility needs to be built to handle the weight and volume of materials being stored. An efficient warehouse is built to handle excessive weight and will be structurally strong.

Improve Warehouse Efficiency by Refocusing Your Approach to Material Handling

If your warehouse is a little less efficient than you’d like, we can help you increase efficiency in your processes and systems. With our material handling services, you’ll get streamlined delivery times, lower costs, and less downtime. We’ll also help you decrease damage and increase worker safety. Contact us today to learn more about our services.

Materials are moved around within a facility for several reasons. Most frequently, they’re moved in order to protect, store, and make them easier to access. They’re also moved to prepare them for order processing.

Materials stored in a facility are generally moved from shelving and other types of material slots located around the facility. For example, a warehouse might have sections full of shelving to stack materials and vertical dividers on the ground to separate materials that need to be stored unstacked.

When your materials are small and light enough, they’re often moved around by workers. This is usually reserved for small tasks, like gathering small or specific items for an order. When large quantities of small items need to be moved, they’re generally moved with equipment to save time.

Order-picking equipment is what workers in a large space use to collect items for an order. For example, order picker platforms and stock pickers are common pieces of equipment workers use to prepare orders.

Forklifts are the most common piece of equipment used to move materials around in a large space. Forklifts are essential for moving materials that are large, heavy, and need to be loaded onto high shelves.

There are several different attachments that give forklifts varied uses, like drum handlers, carpet poles, and forks. Depending on the material being moved, workers will change out the attachment to get the job done.

A safety basket is something workers stand in to be lifted into the air to reach high places. These are most commonly seen on construction job sites, but are also used in warehouses and other materials storage facilities.

Loading docks require special equipment to unload and move materials from trucks. Some common pieces of loading dock equipment include dollies, carts, dock bumpers, dock plates, dock levelers, and dockboards.

When your goal is to save money and increase your profits, the importance of material handling comes into play when you need to streamline your warehouse operations. To maximize your profits, all of your systems need to be efficient, including systems that determine how materials are to be moved and stored, and systems designed to keep workers safe.

Systems efficiency is also tied to your inventory management. If you’re struggling to keep accurate inventory counts, once you improve how materials are moved through your warehouse, you’ll see results in your inventory system as well.

Operating a successful warehouse requires using the right equipment and keeping that equipment well maintained. When you partner with us, we’ll help you streamline your material handling best practices with a focus on improving safety for your teams.

We provide forklift rental services, forklift maintenance and repair, and warehouse dock design services to improve your product flow. If your warehouse needs a boost in efficiency, contact us today to learn more about our services. We understand the importance of material handling.

What’s the importance of material handling? Material handling matters because it impacts business operations. An efficient material handling process will have a positive impact, while an inefficient or unsafe process will have a negative impact.

For example, when products are moved and stored efficiently, they’re available when needed, orders can be processed faster, and it’s easier to keep an accurate inventory. This supports a business’ bottom line.

Another factor regarding the importance of material handling matters is safety. While it’s important to teach workers to safely use equipment, there are more skills involved. Workers also need to recognize safe clearances, avoid other workers, and secure their loads properly.

Proper training is important for preventing injuries, no matter how minor. Every day, over 200 material handlers experience a cut that qualifies for being reported. Cuts are common because workers are constantly removing straps with blades, cutting open taped boxes, and cutting wire and rope. Material handling best practices can reduce the potential for accidents and damaged materials.

Although handling of actual materials is easy to understand, there’s another aspect to material handling that plays an equal role: warehouse design and systems. These components contribute to material handling best practices.

How a warehouse or other storage area is designed impacts the workflow of handling materials. For instance, the width and length of aisles, the height and spacing of shelving, and where shelves and other storage spaces are located throughout the warehouse. A well-designed warehouse will be built to facilitate a quick flow from unloading to storage and retrieval for orders.

How materials are moved from one location to another matters. An efficient process will move materials quickly and safely, avoiding damage to the materials. This requires maintaining safe and efficient conveyor systems. The same is true for material storage. Some materials can be stacked, but others can’t. Sometimes there’s a weight limit for stacks, and other times limits are for worker safety.

A storage facility needs to be built to handle the weight and volume of materials being stored. An efficient warehouse is built to handle excessive weight and will be structurally strong.

 Want to extend your industrial equipment life expectancy? Here’s how to do it. If you rely on equipment like forklifts, terminal tractors, aerial lifts, and electric tugs, you need to know how to get the most out of your equipment. Industrial equipment won’t last forever, but you can extend your equipment’s lifespan with the right strategy.

The life expectancy of your equipment will depend on many different factors, including how often it’s used, how well it’s maintained, and what it’s used for. At some point, a piece of equipment will become too costly to continue using, but that point will vary depending on the business.

Forklifts are probably the most widely used piece of industrial equipment around, especially in warehouses. It’s a big commitment to buy a forklift, used or new, so it’s a good idea to know how long you can expect your forklifts to last.

Forklift life expectancy varies, but in general, a forklift will last 10,000 working hours. This number, however, is dependent on several factors, including the environment in which it’s operated. For example, a forklift operated on uneven terrain won’t last as long as one that is operated on a flat, easy surface. Also, a forklift operated in a dirty, outdoor environment won’t last as long as one used indoors.

A forklift will last much longer when it’s properly maintained, properly used, and stored where it’s not exposed to excessive hot or cold temperatures. Other factors that impact the lifespan of a forklift include how often it’s used to carry heavy loads and the type of forklift and year it was built.

One important thing to remember is that electric forklifts have a different industrial equipment life expectancy because of the battery. Just like traditional forklifts, they’ll last longer when used in a clean, indoor space. However, the batteries will only take a finite number of charges before they need to be replaced.

In general, each piece of equipment in your warehouse will have a different lifespan depending on factors specific to the equipment. For instance, a used piece of equipment won’t last as long as a new piece of equipment, but there are benefits to buying used. Also, if you’re using your equipment continuously you can expect far more wear and tear than if you’re only using it periodically. 

To maintain your warehouse equipment in good working order, you need protocols that keep you on top of maintenance, repairs, and inspections. Most companies use software to keep track of these things. Here are several things that should be included in your protocols.

Inspections should be performed regularly to maintain safety and make sure your equipment is in working order. Each piece of equipment will be on a different inspection cycle, but here’s a general outline for two common machines:

Always refer to OSHA for inspection standards—then you can create stricter standards if you need to for your own purposes.

Your equipment will last longer when you handle repairs right away. Never let a needed repair go undone for long. Always get repairs made quickly, and if you can’t get to a repair right away, take the equipment out of service temporarily. Never allow workers to use a piece of equipment that is waiting to be repaired.

It’s recommended that forklifts be fully serviced after every 200 hours of use. This includes inspecting mechanical components, adding fluids, changing the oil and air filter, adjusting the idle and ignition timing, and greasing up certain components.

After every 600 hours of use, you’ll want to have your forklift’s radiator cleaned and possibly replace the hydraulic filter.

Whether it’s a forklift or an electric tug or any other piece of equipment, make sure all operators are certified and validated in their ability to operate the equipment. This helps ensure your workers will use the equipment properly. If you discover that anyone is misusing the equipment, put a stop to it immediately.

Different pieces of equipment are meant for different uses. Always ensure equipment is used for its intended purposes only. Using machinery in other ways can create safety hazards and can damage the equipment.

Whether your equipment is new or used, make sure to follow the steps outlined in this article to prolong the lifespan of each machine. In the long run, by performing regular maintenance and inspections, you’ll save money on repairs that result from neglecting that maintenance.

Make your warehouse safer and pass your inspections easier by using a warehouse safety checklist.

A warehouse can be filled with safety hazards which, if left unchecked, can cause serious harm to your employees or visitors. According to OSHA, the fatal injury rate for the warehousing industry is higher than the national average. If you run a warehouse, safety is paramount.

In a warehouse, the most common safety hazards include:

Lack of proper fire safety provisions, like fire extinguishers or fire blankets.

With so many things that can go wrong, it’s hard to keep track of everything without a method. A warehouse safety checklist is one method that will help you maintain a safe environment.

A warehouse safety checklist is a list of things to inspect related to safety. In addition to keeping your warehouse safe, using a safety checklist to conduct your own walkarounds will help you pass official inspections.

In addition to performing your own safety inspections, here’s what you can do to make your warehouse safe.

Your team is only as safe as the equipment you give them. Everyone can follow all of the right safety procedures and best practices, but it won’t make a difference if critical equipment fails at the wrong time.

To prevent equipment failure hazards, establish a standardized schedule for equipment maintenance. Daily visual checks should be implemented before using any equipment, and we recommend thoroughly inspecting warehouse equipment every six months to assess its condition and perform preventative maintenance.

Regular monitoring can help you determine what needs to be repaired or replaced, which keeps equipment in good shape, simplifies budgeting, and reduces the chances of hazardous failures.

Always make sure anyone who operates machinery, like a fork lift, is certified and well-trained. Don’t just have people take a written test and do a quick run down an aisle, teach the nuances of how to use a fork lift and evaluate their competence.

Continual training is also important. People get comfortable and complacent in their jobs and sometimes that involves letting safety protocols fall to the wayside. Continual training reminds workers of your company’s safety protocols, which helps them follow those protocols.

Require periodic recertification as part of your ongoing safety training protocol. This will force workers to take a refresher on basic equipment safety.

It’s critical to put a stop to unsafe practices immediately when you see something happening. For instance, if you catch workers “dock jumping” or climbing the shelves to reach an item up high, you need to end that practice immediately. Never ignore any instance of a safety issue or violation. If new workers see people doing something unsafe, they’ll think it’s okay and they’ll do it, too.

Whether you’re marking exit doors or putting warnings all over your dock, make sure you use the right signage. Only use stickers where appropriate. For instance, you need lighted signs for your exits, but stickers are great for dock warnings.

Horseplay is inevitable. At some point, someone’s going to be messing around in a dangerous way. Crack down on this behavior so that nobody gets the impression that it’s okay.

You might also see workers doing something dangerous that’s trending online. Thanks to the internet, people are performing dangerous stunts and “challenges” and many have gotten hurt in the process. If you see any kind of horseplay, put a stop to it fast.

Every worker knows what it’s like to need to move a heavy box with no one around. Many workers just find a way to move it on their own, risking their safety in the process. Although it doesn’t always result in injury, many warehouse workers injure their backs and other parts of their body from lifting boxes on their own.

When you enforce your team lift policies, you’re putting your workers’ health and wellbeing first. You’ll also avoid the kind of injuries that lead to workers’ compensation claims and/or personal injury lawsuits.
You may want to make ignoring team lift requirements a fireable offense after two or three warnings. Consequences are generally the best way to ensure your workers take a safety rule seriously.

A warehouse safety inspection checklist is the best way for you to ensure your warehouse remains safe for your workers and visitors. Don’t skip this important tool. You can prevent serious accidents and injuries with a solid warehouse safety checklist.

Forklifts are one of the most commonly used pieces of equipment for material handling across the world. However, operating this heavy machinery can be dangerous. It’s important to stay up to date with best practices and safety regulations so you and your employees can maintain a safe work environment and avoid common forklift accidents.

Most forklift hazards can be managed or even eliminated by proper handling, maintenance, and repair of your forklifts. Below is a list of best practices to implement in your workplace to properly maintain safety protocol and guarantee peace of mind for you and your employees.

Many forklift injuries are caused by forklift operators who lack proper training and certification. Employees who are not trained and certified to operate a forklift can put themselves and others in danger. In order to maintain a safe workspace, all forklift operators must be certified by OSHA and renew their certification every three years. Proper training and certification ensures that those who operate heavy machinery do so safely, which reduces forklift hazards. It also keeps your workplace up to date with best operational practices for forklifts.

Forklifts are used heavily in the material handling and supply chain world, handling thousands of pounds of material a day while performing the same repetitive movements over and over again. This heavy, repetitive usage can result in wear and tear over time, so it’s important to have a forklift maintenance schedule in place at the beginning of each shift. Regular forklift maintenance helps keep your workplace and your forklifts operating at the highest caliber.

At the beginning of each shift, consider performing checks of the forklift’s tire, fluid levels, horn, brakes, and the forks themselves. A consistent and detailed maintenance plan works best. Keeping your machinery running well ensures that your workplace is operating at the highest level of safety possible. Moreover, a healthy maintenance plan will also keep forklift hazards at a minimum.

While operating a forklift, it’s paramount to pay attention to your surroundings and maintain clear lines of sight with pedestrians and other materials in order to reduce forklift hazards. Many forklift injuries and collisions occur in blindspots, around corners, or while transporting material that blocks the operator’s line of sight. To avoid lower visibility, consider using spotters when you move large materials, turning headlights on, and frequently checking your rearview mirrors. These practices are especially important when operating in dark areas or around corners, helping you avoid collisions and accidents.

The most dangerous forklift injuries and accidents happen at high speeds. When a driver is operating a forklift at too high of a speed and turns or stops abruptly, the forklift can tip over. This sudden movement can eject the driver or even crush them beneath the equipment. Forklift turnovers are one of the leading causes of forklift fatalities and serious injuries. In other cases, even when the forklift stays upright, this sort of jolt can result in whiplash to the driver, causing neck or other long-term injuries. To avoid these forklift hazards, it’s best to operate forklifts within a certain speed limit while avoiding sharp or abrupt turns and stops.

When loading your forklift, it’s important to make sure heavy loads are secure on the forks so you can operate the lift without fear of injury. To avoid injury from falling objects or tipping over from unstable loads, secure material with the heaviest part of it as close to the front of the wheels as possible. Also, avoid operating the forklifts with the forks raised. Any amount of instability may result in objects falling onto the operator or nearby pedestrians. It also increases the likelihood of the forklift tipping from being top heavy. Moreover, it’s important to be aware of your forklift’s load capacity and to avoid overloading your forklift.

In a busy warehouse, it can be difficult and somewhat dangerous for pedestrians to navigate through the constant flow of machinery. To reduce forklift hazards among this chaos, consider providing pedestrian-only zones and abiding by OSHA’s floor marking requirements, which leaves plenty of space for forklifts and other machinery as well as pedestrians.

When operating a forklift, be sure to wear a hard hat, protective eyewear, a high visibility vest, and steel-tipped boots. These safety precautions can help you avoid injury from falling objects, dust, and debris while also allowing pedestrians to see you clearly as you operate the forklift.

Not all forklift hazards are related to collisions or falling objects, however. Operating forklifts over a long period of time may result in a variety of issues for forklift drivers, such as lower back and/or musculoskeletal problems. These issues stem from sitting stiffly in place for a long time while experiencing intense vibrations. To get ahead of these ailments, operators should take regular breaks to stretch and walk around for proper blood flow. Drivers might also consider using ergonomic seating in the forklift, which can help reduce strain on the lower back and legs.

Good forklift safety practices help your business maintain a consistent, cost-effective workflow. Ensuring the safety of your employees and forklift operators results in fewer interruptions and accidents involving forklifts.

As a premier provider of forklift trucks and warehouse equipment, HTX Material Handling is dedicated to helping you maintain the highest degree of safety in your workplace. We can help you avoid common forklift hazards with quality warehousing solutions. Connect with us today.

Your warehouse loading dock might feel like just another corner of the warehouse, but it’s really an integral part of the flow of your business.

The warehouse dock is the focal point of inflow and outflow within your company. It’s often the singular location where goods are shipped and received, so it’s more important than you might initially think. A faulty dock can act as a bottleneck against the flow of business; both loading and unloading can become backed up if proper care isn’t taken to maintain your dock.

A dock leveler bridges the gap between a trailer and the dock itself, compensating for height differences between the two entities and the movement of the trailer bed during loading and unloading. Dock levelers are composed of two main parts: the ramp and the lip. These two parts are moved in conjunction with one another to provide a smooth transition for products coming into your warehouse from the trailer and vice versa.

Warehouse loading docks come in a variety of styles, and each type provides different levels of security, cost, and maintenance. With that in mind, let’s explore the three commonly used types of loading dock.

Hydraulic Dock Levelers use hydraulic pumps and cylinders to fully raise and lower the ramp and lip into position with the trailer. These levelers have the highest capacity and are considered the safest and most efficient choice. However, hydraulic dock levelers are also the most costly up front, when compared to other types of levelers.

Air Powered Dock Levelers use an airbag or bellows system to raise and lower the ramp and lip into position. While they have less carrying capacity than hydraulic levelers, they are a slightly more economic choice.

Mechanical Dock Levelers use a pull chain to raise the ramp and lip, and an operator can simply walk down the ramp to lower it into position. These levelers are the least costly type of dock leveler, but are often used for more basic applications. Mechanical levelers are also helpful in situations with extreme floating, or when the trailer itself is moving.

In any given business, the requirements for loading and unloading will vary. Different types of warehouse loading dock leveler styles are conducive to the varying needs of different businesses. Here are three styles of dock leveler installation that might further improve your business.

Pit Style Levelers are installed in a recessed concrete pit, allowing for the dock leveler to be flush with the surrounding concrete when not in use. These dock levelers have a great load capacity and can extend up or down depending on the trailer height. Pit style levelers can be hydraulic, air, or mechanically powered.

Edge of Dock Levelers are attached directly to the dock face, bridging the gap from dock door to trailer on the outside. Edge of dock levelers are less costly than pit style or vertical storing dock levelers, but are not as heavy duty; their carrying capacity is much less.

Vertical Storing Dock Levelers are stored upright on the inside of the warehouse loading dock. They are ideal for climate controlled warehouses and for keeping dust, debris, and pests out of the dock area, since a trailer doesn’t need to open its door upon approach. Vertical storing dock levelers are often considered specialty levelers, since their application is used in particular cases. For this reason, they are often more expensive than pit style or edge of dock levelers.

Check out McGuire Dock Levelers and loading dock equipment

Whether your business sends and receives just a few shipments each week or is constantly shipping and receiving products, your dock, leveler, and dock shelter will require regular maintenance from general wear and tear.

Keeping your warehouse loading dock up to date on maintenance can mitigate or prevent issues like trailer separations, forklift accidents, or other forms of damage to products and your facility. Dock maintenance should occur at least once every 90 days, with special care taken to examine mechanical, electrical, and hydraulic components. Dock maintenance should include an initial inspection, followed by a deep cleaning, lubrication and adjustment of any moving parts, and, finally, documentation of any issues or changes. These five steps can help improve the efficiency of your warehouse’s energy consumption as well as the workflow itself.

Docks are dangerous places within the warehouse. Not only are they a hub for products moving in and out, they are also a focal point for heavy machinery like forklifts, trucks, trailers, hydraulic or air powered levelers, and more. Because the loading dock is such a central location for your business, it’s important to not overlook any safety precautions. Proper safety around the dock can greatly reduce the risk of harm or injury to employees as well as the possibility of an issue harming your bottom line and your workflow.

Find OSHA’s loading and unloading requirements

Vertical order pickers can be a great way to increase the productivity of your warehouse or distribution center. Although similar in design to forklifts, vertical order pickers work differently. Order pickers allow their operators to navigate directly to products, while forklifts just allow one to move many items simultaneously. By allowing operators to avoid the time consuming task of loading and unloading pallets from a forklift, and pull from the product directly, order pickers can increase the efficiency of your warehouse or distribution center. With this uptick in efficiency, you’ll be able to complete more orders and increase your profits over time.

Linde Material Handling designs a variety of material handling equipment for each and every type of warehouse need. Whether you are working in online retail, small parts logistics, or in a large distribution center, Linde likely has the high quality equipment you’re looking for. Their wide range of order pickers allow you to cover any need within your warehouse while driving efficiency and productivity upward in the long term.

Growing businesses are always looking for ways to maximize their warehouse or distribution center efficiency. As the demand for your services rises, you’ll find yourself needing more and more space for materials, parts, and products. Your warehouse storage system will likely rise in tandem, literally starting from the ground level and moving up. As these changes happen, you’ll need the right equipment to ensure that you can access all of your products, regardless of how high off the floor they are.

Linde designs order pickers, like their V Modular picker, that allow access to materials from the ground up to 12 meters, letting you stack continually upward without worrying about running out of storage space. Linde aerial lifts can also extend upward while simultaneously traversing across the ground, letting you reach your picking location in the quickest way possible. Use these pieces of equipment to maximize your inventory efficiency and exceed at even greater heights.

Keeping your business running smoothly and efficiently is all about maintaining speed. Getting from one end of the warehouse to another to fulfill an order as quickly as possible lets your business complete more work in a shorter amount of time. Maintaining this high degree of efficiency lets your company take in higher profits, since less time is spent going back and forth.

New Linde order pickers, like the V Modular B picker, have a maximum speed of 13 kilometers per hour, allowing you and your employees to move quickly through picking orders without worrying about running behind schedule. Even over rough terrain, Linde pickers can get you and your products from point A to point B with the utmost efficiency.

Linde’s order pickers are tailored to each warehouse or distribution center’s needs. By allowing warehouses or distribution centers to choose from a variety of optional elements, such as modular mirrors or extra sensors, you can be sure that your order picker will be the most ideal piece of equipment for your workspace.
Mast height, load capacity, and even travel speeds can also be adjusted for each workplace to make sure that your order pickers function in the best way for your space. Linde order pickers even come with the ability to add terminals or mounting brackets to further tailor your order picker for your warehouse.

Explore Linde Material Handling’s order pickers

Vertical picking can be dangerous work, but with a variety of fine-tuned safety elements in place on their order pickers, Linde lets your company thrive in the area of workplace efficiency without fear of running into safety issues.

Linde’s order pickers are not only designed for speed and efficiency within the warehouse, but for the utmost safety. A variety of mechanisms work simultaneously to keep your workplace safe:

Linde’s order pickers come with a number of ergonomic elements geared toward keeping employees safe and comfortable during the picking process. These measures can increase accessibility to picking and reduce the risk of injury from repeated use.

Here are a few modular safety components included in Linde order pickers:

Having such a variety of safety mechanisms in place keeps your warehouse or distribution center running smoothly; keeping your employees safe is paramount to maintaining an efficient workflow throughout the day

HTX Material Handling is your go-to supplier for order picker and forklift rental in the Dallas and Houston areas. With HTX, your fleet management becomes a breeze with their variety of equipment rental arrangements and range of options for parts and services. If you need to rent a forklift, lift truck, or Linde order picker for a week, HTX has you covered. Or, maybe you need Houston forklift parts or your forklift serviced. HTX can provide assistance there, too.

Contact HTX Material Handling today if you’re in need of equipment, parts, or service.

Every inch in your warehouse storage space has a price. You’re losing potential profits if you’re not taking full advantage of your warehouse and its storage space. On the other hand, though, you risk lower efficiency if you use too much storage space. Finding the perfect balance of efficiency and storage space is the holy grail of warehouse operations.

When a warehouse reaches 80 to 90% of its maximum storage space, warehouse managers must take immediate action because warehouse space is vital and operations can’t afford to waste it. Optimizing and organizing your warehouse is the only way to deal with this problem, however, it can be a challenging task.

Here are some space utilization techniques and warehouse solutions your facility can put into practice.

You can’t take up more floor space, staging areas, and essential areas of the warehouse, limiting the mobility of workers and material handling equipment. Raising the vertical parameters of a storage space is a practical warehouse organization idea.

You can increase your storage space by raising your stacked height of pallet racks or industrial shelving. Your warehouse engineers or technicians will tell you if raising your shelving is doable. Engineers must address safety codes and health risks first, and if structurally possible, they can raise the vertical parameters of the space.

Another warehouse utilization is to install a mezzanine or raised platform above the ground-level workspace. You can add an extra storage layer if the raised area meets all the requirements.

Creating narrow aisles is another warehouse storage solution. If possible, you can decrease aisle widths by a few inches and create a surprising amount of new space. Narrowing aisles in your warehouse is a simple, cost-effective way to save space.

However, there are some things you should consider. You must know your warehouse layout and how much space you can spare to sacrifice. For example, your narrow-aisle forklifts need to be able to maneuver in those tight spaces. They can’t operate efficiently if the rows are squished too closely together. Also, if the products in an aisle are too massive, workers and machines will have a harder time loading and unloading them.

A warehouse management system (WMS) is a program that clocks your inventory in real-time and can tell you where to store and unload products. These digital storage systems keep warehouses operating smoothly, safely, and efficiently.

A WMS can decide if your warehouse is more efficient with an in-first, out-first model, an in-first, out-last model, or any other method. Here are some other things that a WMS can help you with:

You can rent a storage container if you know your warehouse is receiving extra products for a specified amount of time. It’s not a long-term solution, but extra storage space can alleviate issues during holidays or events where inventory may increase.

You can also build an outdoor extension to your warehouse if your property can manage it. You can use this space for quickly shipped goods or products that can handle external forces for periods of time.

Does your warehouse need more storage space? HTX Material Handling has storage and warehouse solutions for you. We provide state-of-the-art material handling equipment such as forklifts (electric and internal combustion), electric tugs, aerial lifts, and automated conveyor systems.

We partner with top brands including, Linde, Balo, JLG, and MasterMover, so you get the best material handling equipment. If you need a storage solution, HTX Material Handling is the place. Contact us today.

Automation is the future of most major industries, including warehouse and material handling. Many warehouse processes can be automated and made more efficient. Computerized functions can automate order picking, storing, and the conveying of products.

Automation allows workers to focus on critical thinking, qualitative attention, and outbound tasks, while reducing human error and potential injury.

HTX Material Handling will help you maximize your warehouse storage space. We provide material handling equipment, warehouse solutions, rentals, parts and services, and more.

We have quality brand equipment to boost your efficiency, safety, and productivity in the warehouse.

Our automated systems can unload products from trailers, manufacturing, or processing lines through robotic technology. Automated systems can also be specially programmed to store and retrieve products on demand, allowing employees to focus on more essential tasks and boosting their safety.

HTX Material Handling has your back. Contact us today.

It’s easiest to think of a forklift as a seesaw, which is a simple machine with three parts: the fulcrum, the counterbalance, and the load-bearing mechanism.

The front wheels of a forklift are its fulcrum, balancing the weight on their larger diameter. The forklift’s heavy backend is the counterbalance. The back of the forklift is where batteries, fuel, and other essential heavy components rest. Lastly, the load-bearing mechanism is the front carriage, forks, and additional attachments.

Here are some terms that relate to a forklift’s load capacity:

Certain brands prioritize different material handling needs. For example, some forklift providers mainly sell electric forklifts for their simpler, more efficient models, which are perfect for indoor use. Others sell internal combustion forklifts for heavy lifting and outdoor usage.

Here are some of Linde’s forklifts and their material handling capacity.

Linde has an impressive line of electric forklifts. On average, Linde’s electric forklifts can handle a rated capacity of 4,000 to 6,000 pounds. Some more powerful trucks can even manage a forklift capacity of 17,500 pounds. These electric forklifts are perfect for indoor material handling and transportation.

Linda also offers internal combustion lift trucks powered by diesel and LP gasses. These forklifts can have different wheel types, offering different trade-offs in forklift capacity. Cushioned wheels can lift around 4,000 to 6,000 pounds, but pneumatic-wheeled forklift trucks can lift a staggering 40,000 pounds, making them heavy-duty material handling equipment.

Order picking and automated storage require narrow forklifts to fit and maneuver between tight spaces. Linde’s standard narrow-aisle forklifts have a 3,000-pound capacity, with 4,500 pounds on shorter models. Remember, lifting something high requires a heavy counterbalance to offset the center of gravity. The higher something is raised, the more the center of gravity shifts, making it harder to hold heavy weight.

Now that we’ve discussed Linde’s line of material handling equipment, let’s briefly go over the average weight capacities for different forklift models.

Here’s a list of the general forklift capacities for base material handling models:

The general rule of thumb: the heavier and longer the forklift, the more weight it can lift. Returning to the seesaw example, a heavy weight requires another similar weight to counterbalance the load.

HTX Material Handling has you covered if you require a forklift rental in Dallas, Houston, or the surrounding areas. We offer high-quality brands of material handling equipment and warehouse solutions. We also provide equipment rentals if you only need a forklift for a short period. Contact us today.

Knowing how to safely operate your forklift is essential. Forklifts are large machines carrying thousands of pounds of weight. Any mistake can cause severe injury or even death.

Never exceed a forklift’s maximum weight capacity, rated or actual. Ignoring a forklift’s lifting capacity can cause tipping and loss of rear steering that lead to damage. Always center a load before transporting heavy material. Follow the safe loading capacity guidelines on the forklift’s data plate. Data plates tell you vital information about the equipment, like model number, tire size, and the amount of weight that can be lifted.Here are some more helpful tips:

Whether you need a forklift for sale in Houston or a rental in Dallas, HTX Material Handling has you covered. We offer a variety of material handling equipment, such as forklifts, aerial lifts, electric tugs, terminal tractors, and more. We’ve partnered with Linde, Baoli, JLG, and other excellent material handling brands to offer you the best, most efficient equipment on the market.

If you operate a warehouse or commercial business in Dallas, TX, or the surrounding areas, don’t hesitate to reach out to HTX Material Handling. Contact us today.

The past few years have introduced a variety of problems for the warehouse industry—supply chain problems, worker shortages, and most importantly, COVID-19. Luckily, there are ways to circumnavigate and address these issues.

The economy, supply chains, and other circumstances are constantly changing for industries around the world. Adapting and evolving are the best ways for businesses to handle these potential issues. Knowing what problems your industry is facing is essential to understanding how to fix these problems. The COVID-19 pandemic forced the warehouse industry to adapt to the presented problems.

Here are some of the common issues the warehouse industry has been facing over the past few years:

Managing inventory is an essential function of the warehouse industry. However, many issues can disrupt this vital process.

Supply chain shortages can disrupt any warehousing storage facility. Warehouses constantly track their inventory and behave accordingly. Based on data, warehouses hire the correct number of employees, manage storage space, and update operations depending on how much inventory is going inbound and outbound.

Abrupt emergencies, lack of demand, and high supply costs can affect inventory. For example, when COVID-19 first surfaced, many industries reduced their number of employees or shut down facilities completely, interrupting warehouse functions and reducing manufactured goods. Transport restrictions were put into place, affecting the shipping of goods from other countries and longshoring facilities.

The warehouse industry faces a shortage of qualified or eligible workers. COVID-19 has been one of the biggest reasons for this.

For example, every worker must be tested and quarantined if a single worker contracts the virus, sometimes halting operations for long periods. Worker shortages affect complex tasks such as order picking, order fulfillment, and other responsibilities. What are you supposed to do if your warehouse has new shipments that require storage space, but there aren’t enough workers to free up storage locations before the delivery?

Worker shortages have drastic effects and are just as serious as supply chain disruptions.

Are your warehouse operations facing COVID-19-related issues such as worker shortages and supply chain disruption? HTX Material Handling is here to help.

The warehouse industry has found efficient ways to get around COVID-19-related problems and other supply chain issues. These solutions and helpful technologies assist warehouse managers and their workers.

Warehouse management systems (WMS) are a technology that tracks inventory, warehouse processes, and other essential data. They manage storage systems, goods and services, and any shifts in supply, all in real time. These automated systems can increase productivity and reduce wasted time.

Automated systems can quickly identify any shifts in the supply chain and handle the problem accordingly. A WMS helps the bottom line of any warehouse.

Automation is the future of the warehouse industry. Warehouses process thousands of products, deliveries, and shipments a day. Because of this, warehouse automation can help you deal with COVID-19-related problems.

Automation technology can carry out pallet racking, product transportation, and inventory picking, allowing employees to tackle tasks that require critical thinking and projects that automation can’t handle.

Material handling automated systems can unload products from trailers and processing or manufacturing lines. They may also be specially programmed to store, load, and retrieve products on demand.

Investing in warehouse best practices can reduce human error, promote predictable lead times, and reduce worker shortage problems. With automated systems and processes, you can accomplish more with fewer people.

HTX Material Handling is the premier provider of forklift trucks, warehouse systems, and warehouse equipment in Houston, Dallas, and the surrounding areas. Our high-quality products and prioritization of customer satisfaction help us remain an industry leader within the material handling warehouse industry.

HTX Material Handling is your go-to material handling, automation, and storage solutions provider. We want to boost your facility’s productivity and ensure it runs efficiently and safely. Contact us today.